|
|
|
Industrial Drives |
| Bearings | ||
| Conveyor Components |
| Rex Coupling Family - Total Solutions - E-Z Maintenance, Coupled with Performance! | |
 |
|
| Rexnord Industries offers the widest range of flexible couplings: elastomeric, metallic disc, composite disc, metallic grid, gear and fluid couplings. Rexnord has seen & solved virtually every problem a coupling application can present in the past 80 years. Their complete coupling family of Omega Elastomeric, Wrapflex, Torus, Thomas Disc, Falk Steelflex, Falk Lifelign Gear, True Torque Fluid, and Addax composite couplings are manufactured for Quality and Reliability. | |
|
Omega Coupling is designed for E-Z maintenance. with excellent vibration dampening capability and high misalignment capacity, providing extended life to connected equipment. The flex element can easily be replaced without disturbing the hubs or moving and realigning connected equipment, making assembly and disassembly very quick and efficient. Omega® is ideal for use in industrial applications such as pumps, screws compressors, blowers, mixers, crushers, and miscellaneous drives. |
| Omega Coupling | |
|
Thomas Disc Coupling Today, Thomas® engineers continue to improve the disc coupling through design innovation and modern materials. Thomas disc coupling designs incorporate features optimized for motor, engine and turbine driven applications.The Thomas® Disc Coupling is manufactured within a certified ISO 9001 quality system and is unsurpassed in its reputation for quality, reliability and easy maintenance features. |
| Thomas Disc Coupling | |
 |
Falk Steelflex Grid Coupling combines the high-load capabilities of a gear coupling with the flexibility of an elastomer design. TThe original Falk Steelflex T-Grid design offers superior vibration damping and reduces peak torque loads by as much as 30%, reducing wear on connected equipment components. The unique "replace in place" design eliminates the need to move hubs or re-align shafts, reducing element change-out time. Backed by a 5- year warranty, Falk Steelflex couplings require no periodic maintenance when lubricated with Falk supplied LTG (Long Term Grease) at installation. |
| Steelflex Coupling | |
 |
Falk Lifelign Gear Couplings are crowned on the root, tip and face to articulate freely, minimizing wear caused by misalignment. The triple-crowned teeth protects equipment from damaging loads by eliminating tip-loading while reducing backlash and radial clearances. Lifelign couplings have bigger bores and higher ratings providing lower cost selections. When used with Falk LTG (Long Term Grease) Falk Gear Couplings are backed by a 3-year warranty. Falk Gear Couplings provide the low cost, long lasting answer to both small and large capacity coupling requirements. |
| Lifelign Gear Coupling | |
 |
True Torque Fluid Couplings were developed exclusively to meet the challenge of today's sophisticated drives; providing exceptional performance in controlling conveyor and other equipment start-up regardless of load condition. Realize the true advantage of Falk's field-modifiable, fluid coupling available with a standard range of metering orifices to optimize performance, providing the torque control you need. |
| True Torque Fluid Couplings | |
|
Wrapflex Coupling is a low cost, low maintenance, non-lubricated elastomer coupling which incorporates a patented hub design to reduce operating thrusts on seals and bearings. Quick, easy installation and replacement sets new standards for reduced downtime. Because motors don't need to be moved, our "replace-in-place" elements even eliminate the need for time consuming realignment. Wrapflex Elastomer Couplings are backed by a 3-year warranty. For simplicity and cost effectiveness over the life of your coupling, it doesn't get better than Wrapflex. |
| Wrapflex Coupling | |
 |
Addax Couplings use lightweight advanced composite materials increase the critical speed, reduce vibration and extend bearing life. When compared to alternative metal couplings, the Addax coupling reduces overhung bearing loads up to 80%. The advanced composite, full-floating center section weighs less than 25% of a comparable steel spacer. Most Addax coupling assemblies weigh less than 100 pounds, often times eliminating the need for cranes and special lifting equipment |
| Addax® Couplings | |
 |
Falk Torus® Elastomer - Easy to install. . .easy to maintain. . .easy on the connected equipment. Laboratory tests and over 20 years of proven experience have shown the Falk Torus® Elastomer coupling to be softer and more flexible than most other elastomer couplings on the market. Torus's unique inverted tire construction combined with the flexible characteristics of the elastomer element protect your equipment from misalignment and torsional vibrations. |
| Falk Torus | |
 |
Falk Freedom® Disc Couplings have close tolerances and registered fits to provide continuous high-speed service with virtually no maintenance. Falk's one-piece disc packs assure simple maintenance and a "no backlash" connection. Falk Disc Couplings are backed by a 3-year warranty and provide a practical alternative to lubricated and elastomer couplings for many applications. |
| Falk Freedom Disc | |
 |
Falk Steelflex® F Grid Couplings combine the high-load capabilities of a gear coupling with the flexibility of an elastomer design. The unique "replace in place" design eliminates the need to move hubs or re-align shafts, reducing element change-out time. Backed by a 5- year warranty, Falk Steelflex couplings require no periodic maintenance when lubricated with Falk supplied LTG (Long Term Grease) at installation. |
| Falk Steelflex® F Grid Couplings | |
To learn more about Rexnord Couplings, contact us:
 |
 |
  |
 |
 |
Copyright © Richards Company.