"Knowledge in MOTION...Since 1964"

 Industrial Drives
 Bearings
 Conveyor Components 

Falk Couplings Feature

 

Falk Couplings do the job- No Matter What the Job Is! With more flexibility, lower maintenance, high torque load protection, simple cost-effective performance or something else, each Falk coupling type is offered in sizes and with torque and bore capacities to fill a whole host of application parameters. Different couplings suit different applications. Falk has designed and manufactured a variety of state-of-the-art couplings to meet virtually any requirement. 

 

Falk Couplings Get the job done!

Falk couplings are available in standard or dual purpose designs, with special configurations for unique requirements. And each Falk coupling type is offered in sizes and with torque and bore capacities to fill a whole host of application parameters. Different couplings suit different applications. Falk has designed and manufactured a variety of state-of-the-art couplings to meet virtually any requirement. 

Whether you need more flexibility, lower maintenance, high torque load protection, simple cost-effective performance or something else, Richards Company, an authorized Falk Coupling Distributor Partner, can specify a coupling to suit your most demanding application Richards Company can analyze your application, and determine how special characteristics - including bore fit options, stiffness, balance, shaft gaps, operating speed, and environmental conditions - can affect coupling selection. 

   

Falk Steelflex® Grid Couplings combine the high-load capabilities of a gear coupling with the flexibility of an elastomer design. The unique "replace in place" design eliminates the need to move hubs or re-align shafts, reducing element change-out time. Backed by a 5- year warranty, Falk Steelflex couplings require no periodic maintenance when lubricated with Falk supplied LTG (Long Term Grease) at installation.

  

Falk Steelflex® F Grid Couplings combine  the high-load capabilities of a gear coupling with the flexibility of an elastomer design. The unique "replace in place" design eliminates the need to move hubs or re-align shafts, reducing element change-out time. Backed by a 5- year warranty, Falk Steelflex couplings require no periodic maintenance when lubricated with Falk supplied LTG (Long Term Grease) at installation.

  

Falk Lifelign® Gear Couplings are triple-crowned for maximum capacity, have bigger bores and higher ratings providing lower cost selections. When used with Falk LTG (Long Term Grease) Falk Gear Couplings are backed by a 3-year warranty. Falk Gear Couplings provide the low cost, long lasting answer to both small and large capacity coupling requirements.

  

Wrapflex® is a low cost, low maintenance, non-lubricated elastomer coupling from Falk. Quick, easy installation and replacement sets new standards  for reduced downtime. Because motors don't need to be moved, our "replace-in-place" elements even eliminate the need for time consuming realignment. Falk Wrapflex Elastomer Couplings are backed by a 3-year warranty. For simplicity and cost effectiveness over the life of your coupling, it doesn't get better than Wrapflex. 

  

Falk Freedom® Disc Couplings have close tolerances and registered fits to provide continuous high-speed service with virtually no maintenance. Falk's  one-piece disc packs assure simple maintenance and a "no backlash" connection. Falk Disc Couplings are backed by a 3-year warranty and provide a practical alternative to lubricated and elastomer couplings for many applications.

  

Falk Torus® Elastomer - Easy to install. . .easy to maintain. . .easy on the connected equipment.     Laboratory tests and over 20 years of proven experience have shown the Falk Torus® Elastomer coupling to be softer and more flexible than most other elastomer couplings on the market. Torus's unique inverted tire construction combined with the flexible characteristics of the elastomer element protect your equipment from misalignment and torsional vibrations.

  

Falk's 1000 Series  Fixed Filled Fluid Couplings were developed exclusively to meet the challenge of today's sophisticated drives; providing exceptional performance in controlling conveyor and other equipment start-up regardless of load condition. Realize the true advantage of Falk's 1000 Series, field-modifiable, fluid coupling available with a standard range of metering orifices to optimize performance, providing the torque control you need.

  

 

Falk Gmax Long Term Grease is specially formulated to provide superior lubrication for flexible shaft couplings. Falk engineers have spent years measuring the wear rates on coupling components using various lubricants and coatings. Virtually every common industrial lubricant has been centrifuged under laboratory conditions per ASTM standard test methods for "Oil Separation from Lubricating Grease by Centrifuging." The results of extensive research indicated that greases with high viscosities and low bleed rates produce the longest life. 

  

Falk Orange Peel Coupling Guards patented 3 step trim and fit design revolutionizes equipment guard convenience and value. They're available right off the shelf and right out of the box. You get job-site safety without the expense and long lead times of customer engineered guards. Orange peel guards comply with OSHA, ASME and ANSI standards!

To learn more about Falk Couplings, contact us:

 | Clearance | Contact | Links | Knowledge Center | Markets | News | Orders | Partners | Products/Services | Quotes | 

Copyright © 1997-2014 Richards Company.  Last modified: May 08, 2014